Volvo XC60: Brake lights and taillights
The brake lights and taillights are replaced from inside the cargo area.
NOTE
Before starting to replace a bulb, see
page 322.
1. Open the panel.
2. Remove the bulb holder by turning it counterclockwise.
3. Remove the burned out bulb by pressing it in and turning it counterclockwise.
4. Insert a new bulb, press it in and turn it clockwise.
5. Reinsert the bulb holder and turn it clockwise.
Location of taillight bulbs
Taillight lens, right side 1 Parking/side marker lights (LED) 2 Side reflector 3 Brake light 4 Backup light 5 Turn signal 6 Brake lights (LED) NOTE If an error message remains in the display ...License plate lighting
1. Remove the screws with a screwdriver. 2. Carefully detach the entire bulb housing and pull it out. 3. Replace the bulb. 4. Reinsert the entire bulb housing and tighten the screws. ...See also:
Treadwear
The treadwear grade is a comparative
rating based on the wear rate of
the tire when tested under controlled
conditions on a specified
government test course.
For example, a tire graded 150
...
Tire Terminology and Definitions
Air Pressure: The amount of air inside the tire pressing outward on each square
inch of the tire. Air pressure is expressed in kPa (kilopascal) or psi (pounds per
square inch).
Accessory Weight: ...
Turn-signal lever
1- Turn-signals. When making a normal turn, use position (1). The lever will
return automatically when cornering is completed. 2- Lane-change signals. When moving
the lever to (2) slightly to ch ...