Nissan Rogue: Continuously Variable Transmission (CVT) - Driving the vehicle - Starting and driving - Nissan Rogue Owner's ManualNissan Rogue: Continuously Variable Transmission (CVT)

Nissan Rogue / Nissan Rogue Owner's Manual / Starting and driving / Driving the vehicle / Continuously Variable Transmission (CVT)

The Continuously Variable Transmission (CVT) in your vehicle is electronically controlled to produce maximum power and smooth operation.

The recommended operating procedures for this transmission are shown on the following pages.

Follow these procedures for maximum vehicle performance and driving enjoyment.

Engine power may be automatically reduced to protect the CVT if the engine speed increases quickly when driving on slippery roads or while being tested on some dynamometers.

Starting the vehicle
1. After starting the engine, fully depress the foot brake pedal before moving the selector lever out of the P (Park) position. This CVT is designed so that the foot brake pedal must be depress ...

See also:

Setting hazard indicator and horn mode
This vehicle is set in hazard indicator and horn mode when you first receive the vehicle. In hazard indicator and horn mode, when the LOCK button 1 is pushed, the hazard indicator flashes tw ...

Instrument Panel
A. Air Vents on page 8‑5. B. Turn and Lane&-Change Lever. See Turn and Lane-Change Signals on page 6‑3. Exterior Lamp Controls on page 6‑1. Fog Lamps on page 6‑4. C ...

Changing a flat tire
The procedure described on the following pages can be used to rotate tires as well as to change a flat tire. When preparing to change a flat tire, check to be sure the gear selector lever is ...