Jeep Liberty: Adding Fluid
Fluid should be added only to fill hole until fluid begins to run out of the hole.
Fluid Level Check
The fluid level should be to the bottom edge of the fill hole (1) when the vehicle is in a level position. 1 — Fill Plug 2 — Drain Plug ...Draining Fluid
First remove the fill plug (1), then the drain plug (2). Recommended tightening torque for the drain and fill plugs is 15–25 ft lbs (20–34 N·m). CAUTION! Do not over-tighten the plugs. You ...See also:
Easy Entry/Exit Seat (Available With Memory Seat Only)
This feature provides automatic driver seat positioning to
enhance driver mobility when entering and exiting the
vehicle.
The distance the driver seat moves depends on where
you have the driver ...
General program (special programs off)
This program is compatible with all
on and off-road conditions. If not
already active, it should be selected
before driving on surfaces which are similar to
a hard road surface. Dry cobbles, tar ...
Running out of fuel
Avoid running out of fuel.
If the vehicle does run out of fuel, a minimum
of 4 litres (0.9 gallons) will be required to
restart the engine. The vehicle will need to be
driven 1.6-5 km (1-3 miles) ...