Jeep Liberty: Fluid Level Check - Transfer Case - Maintenance Procedures - Maintaining Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Fluid Level Check

The fluid level should be to the bottom edge of the fill hole (1) when the vehicle is in a level position.

1 — Fill Plug
1 — Fill Plug
2 — Drain Plug

    Adding Fluid
    Fluid should be added only to fill hole until fluid begins to run out of the hole. ...

    See also:

    Seat belt pre-tensioners
    The seat belt pre-tensioners activate in conjunction with the SRS to provide additional protection in the event of a severe frontal impact. They automatically reduce any slack in a seat belt to re ...

    Facts about TSA
    • TSA intervenes at speeds above approximately 40 mph (60 km/h) • The DSTC symbol () in the instrument panel will flash when TSA is working • If the driver switches off the DSTC system's ...

    Introduction
    Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional ...