Jeep Liberty: Draining Fluid - Transfer Case - Maintenance Procedures - Maintaining Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Draining Fluid

First remove the fill plug (1), then the drain plug (2).

Recommended tightening torque for the drain and fill plugs is 15–25 ft lbs (20–34 N·m).

CAUTION!
Do not over-tighten the plugs. You could damage them and cause a leak.

    Adding Fluid
    Fluid should be added only to fill hole until fluid begins to run out of the hole. ...

    Lubricant Selection
    Use only manufacturer’s recommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. ...

    See also:

    Top Tether
    WARNING Always lock the rear seat backrests in their upright position when the rear seats are occupied by passengers. Lock the rear seat backrests in their upright position before installing ...

    Automatic Dimming Mirror — If Equipped
    This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror.Alight to the left of the butt ...

    All-Wheel Drive (AWD) models
    All-Wheel Drive (AWD) models NISSAN recommends that towing dollies be used when towing your vehicle or place the vehicle on a flatbed truck as illustrated. Never tow AWD models with any ...