Subaru Forester: To use as semi-automatic climate control system
Each function can be individually set to AUTO mode independently of the others.
Any function set to AUTO mode is controlled automatically. Any function not set to AUTO mode can be manually adjusted as desired.
The temperature can be set within a range of 65 to 858F (20 to 308C).
To use as full-automatic climate control system
1. Place the temperature control dial in the position for the preferred temperature. 2. Set the airflow control dial and fan speed control dial in the “AUTO” position. The system’s functio ...Fan speed control dial
Fan speed control dial The fan operates only with the ignition switch in the ON position. The fan speed control dial is used to select the AUTO (automatic control) mode or to select the des ...See also:
Operating Information And Precautions
The Command-Trac II transfer case provides four positions:
• Two–wheel drive (2WD) high range
• Four-wheel drive (4WD LOCK) high range
• Four-wheel drive (4WD LOW) low range
• Neutra ...
Remote Audio Controls (if equipped)
Remote Audio Controls
(if equipped)
You can control basic functions of the audio system with the switches on the
steering wheel.
To control the volume:
• To increase the volume, push the up ...
Seat heaters
1 Heats the driver’s seat
2 Heats the front passenger’s
seat
The indicator light is on while
the seat heater is operating.
Push the switch once again to
turn off the seat heater.
■T ...