Subaru Forester: Fan speed control dial
Fan speed control dial
The fan operates only with the ignition switch in the ON position. The fan speed control dial is used to select the AUTO (automatic control) mode or to select the desired fan speed. The dial’s positions and their functions are as follows.
OFF: The fan does not operate.
AUTO: The fan speed is adjusted automatically in accordance with the air temperature inside and outside the passenger compartment, the intensity of sunlight, and other factors. SUBARU recommends using the AUTO position.
Other positions: The fan speed can be adjusted in 7 steps.
NOTE
With the fan speed control dial in the
AUTO position and the airflow control
dial in the “”, “”,
or “” position,
the fan does not operate during engine
warm-up until the engine coolant temperature
exceeds approximately 1228F
(508C).
To use as semi-automatic climate control system
Each function can be individually set to AUTO mode independently of the others. Any function set to AUTO mode is controlled automatically. Any function not set to AUTO mode can be manually adju ...Temperature control dial
Temperature control dial This dial is used to set the desired interior temperature. With the dial set to your desired temperature, the system automatically adjusts the temperature of air su ...See also:
Child-proof locks for the rear doors
WARNING
Children could open a rear door from inside the vehicle. This could result in
serious injuries or an accident. Therefore, when children ride in the rear always
secure the rear doors ...
Front fog lamps
Only vehicles with front fog lamps have the fog lamps function.
WARNING
If you suspect that driving conditions will be foggy, turn the light switch to
before you start your journey. Otherwise ...
Checking the oil level
1) Yellow handle
Check the oil level monthly.
1. Park the vehicle on a level surface and
stop the engine.
2. Pull out the level gauge, wipe it clean,
and insert it again.
1) Upper level
...