Jeep Liberty: To Exit Remote Start Mode Without Driving The Vehicle
Press and release the REMOTE START button one time or allow the engine to run for the entire 15-minute cycle.
NOTE: To avoid unintentional shut downs, the system will disable the one-time press of the REMOTE START button for two seconds after receiving a valid Remote Start request.
To Enter Remote Start Mode
Press and release the REMOTE START button on the RKE transmitter twice within five seconds. The parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will ...To Exit Remote Start Mode And Drive The Vehicle
Before the end of the 15-minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm (if equipped). Then, insert the key in ...See also:
Changing gear
The automatic transmission shifts to the individual gears automatically when
it is in transmission position D. This automatic gearshifting behavior is determined
by:
a shift range restriction, ...
Tire pressure monitor warning messages
If the tire pressure monitor detects a significant pressure loss on one or more
tires, a warning message is shown in the multifunction display. A warning tone also
sounds and the tire pressure war ...
Power Door Locks
There is a power door lock switch on the instrument panel.
There are power door lock switches on the front door panels.
Q : Press to lock the doors.
K : Press to unlock the doors.
When locking ...