Volvo XC60: The alarm system
The alarm is automatically armed whenever the vehicle is locked with the remote key or optional Personal Car Communicator.
When armed, the alarm continuously monitors a number of points on the vehicle. The following conditions will trigger the alarm:
• The hood is forced open.
• The tailgate is forced open.
• A door is forced open.
• The ignition slot is tampered with.
• An attempt is made to start the vehicle with a non-approved key (a key not coded to the car's ignition).
• If there is movement in the passenger compartment (if the vehicle is equipped with the accessory movement sensor).
• The vehicle is lifted or towed (if the vehicle is equipped with the accessory inclination sensor).
• The battery is disconnected (while the alarm is armed).
• The siren is disconnected when the alarm is disarmed.
A message will appear in the information display if a fault should occur in the alarm system.
Contact a trained and qualified Volvo service technician.
NOTE
Do not attempt to repair any of the components
in the alarm system yourself. This
could affect the insurance policy on the
vehicle.
The alarm indicator light
The alarm indicator light
The status of the alarm system is indicated by
the red indicator light on the dashboard (see
illustration):
• Indicator light off – the alarm is not armed
• The indicator light flashes at one-second
intervals – the alarm is armed
• The indicator light flashes rapidly before
the remote key is inserted in the ignition
slot and the ignition is put in mode I—the
alarm has been triggered.
Alarm
...Arming the alarm
- Press the Lock button on the remote key. One long flash of the turn signals will confirm that the alarm is armed. Alarm confirmation settings can be changed in MY CAR, under Car settings ...See also:
Activating/deactivating airrecirculation mode
You can deactivate the flow of fresh air if unpleasant odors are entering the
vehicle from outside. The air already inside the vehicle will then be recirculated.
WARNING
Fogged windows impair ...
Panel dimmer control
Use to adjust the brightness of the
instrument panel and all applicable
switches in the vehicle during
headlamp and parking lamp
operation.
• Move the control to the full
upright position, p ...
Front fog light indicator light (if equipped)
This indicator light is on while the front fog
lights are on. ...