Ford Escape: Determining if the system is operational - Seat-mounted side airbag system - Airbag Supplemental Restraint System (SRS) - Seating and Safety Restraints - Ford Escape Owner's ManualFord Escape: Determining if the system is operational

The SRS uses a readiness light in the instrument cluster or a tone to indicate the condition of the system. Refer to Warning lights and chimes in the Instrument Cluster chapter. Routine maintenance of the side airbag is not required.

A difficulty with the system is indicated by one or more of the following:

• The readiness light (same light as for front airbag system) will either flash or stay lit.
• The readiness light will not illuminate immediately after ignition is turned on.
• A series of five beeps will be heard. The tone pattern will repeat periodically until the problem and/or light are repaired.

If any of these things happen, even intermittently, have the SRS serviced at your authorized dealer immediately. Unless serviced, the system may not function properly in the event of a collision.

    How does the side airbag system work?
    The design and development of the side airbag system included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Working ...

    Safety Canopy System
    WARNING: Do not place objects or mount equipment on or near the headliner at the siderail that may come into contact with a deploying Safety Canopy . Failure to follow these instructions may in ...

    See also:

    Battery
    Your vehicle is equipped with a Motorcraft maintenance-free battery which normally does not require additional water during its life of service. If your battery has a cover/shield, make sure it ...

    RSE front screen menus
    To access this menu, begin by selecting RSE under MEDIA by pressing this button on the front center console (or by using the remote control or the steering wheel keypad). Continue by pressing ...

    High/low beam change (dimmer)
    High/low beam change (dimmer) To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light “” on the c ...