Jeep Liberty: Starting And Operating
- Starting Procedures
- Engine Block Heater — If Equipped
- Automatic Transmission
- Four-Wheel Drive Operation
- On-Road Driving Tips
- Off-Road Driving Tips
- Power Steering
- Parking Brake
- Anti-Lock Brake System
- Electronic Brake Control System
- Tire Safety Information
- Tires — General Information
- Tire Chains
- Tire Rotation Recommendations
- Tire Pressure Monitor System (TPMS)
- Fuel Requirements
- Adding Fuel
- Vehicle Loading
- Trailer Towing
- Recreational Towing (Behind Motorhome, Etc.)
Starting Procedures
Before starting your vehicle, adjust your seat, adjust both
inside and outside mirrors, and fasten your seat belts.
WARNING!
• When leaving the vehicle, always remove the key
fob from the ign ...
See also:
Removing the cover to access the bulbs
NOTE
Before starting to replace a bulb, see
page 322.
1. Open the retaining clamps by pressing
them to the sides.
2. Pull the cover straight out.
Reinstall the cover in the reverse order. ...
Front passenger sensing system
For airbags to do their job they must inflate with great force, and this
force can pose a potentially deadly risk to occupants that are very close
to the airbag when it begins to inflate. For some o ...
Intelligent Key system (if so equipped)
Intelligent Key system (if so equipped)
The Intelligent Key system can operate the
ignition switch without taking the key out from
your pocket or purse. The operating environment
and/or con ...
