Volvo XC60: Removing the cover to access the bulbs - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: Removing the cover to access the bulbs

NOTE
Before starting to replace a bulb, see page 322.

1. Open the retaining clamps by pressing them to the sides.

2. Pull the cover straight out.

Reinstall the cover in the reverse order.

    Reinserting the headlight housing
    When reinserting the housing, be sure that the long locking pin (to the left in the illustration) is securely in place in both of its retaining clamps. 1. Plug in the connector until it clicks ...

    Low beam, Halogen
    1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the cover over the bulbs (see page 323). 3. Unplug the connector from the bulb. 4. Remove the bulb by pressing the h ...

    See also:

    Emissions Inspection and Maintenance Programs
    Some local governments may have programs to inspect the on-vehicle emission control equipment. For the inspection, the emission system test equipment is connected to the vehicle’s Data Link Conn ...

    Child safety locks
    Each rear door has a child safety lock that prevents the door from being opened even if the inside door handle is pulled. When the child safety lock lever is in the lock position, the door ca ...

    Display selection (type A, B and C audio)
    If you press the “TEXT” button during playback, the display will change as shown in the following sequence. For CD-DA: For MP3/WMA/AAC: For iPod®: ...