Nissan Rogue: Setting hazard indicator and horn mode - How to use remote keyless entry function - Intelligent Key system (if so equipped) - Pre-driving checks and adjustments - Nissan Rogue Owner's ManualNissan Rogue: Setting hazard indicator and horn mode

This vehicle is set in hazard indicator and horn mode when you first receive the vehicle.

In hazard indicator and horn mode, when the LOCK hazard button 1 is pushed, the hazard indicator flashes twice and the horn chirps once.

When the UNLOCK pushed, button 2 is pushed, the hazard indicator flashes once.

If horns are not necessary, the system can be switched to the hazard indicator mode.

In hazard indicator mode, when the LOCK button is pushed, the hazard indicator flashes button is pushed, the hazard indicator flashes twice. When the UNLOCK pushed, neither the hazard indicator nor the button is pushed, neither the hazard indicator nor the horn operates.

Hazard indicator and horn mode:

Hazard indicator mode:

Hazard indicator mode:

Switching procedure:

Switching procedure:

To switch the hazard indicator and horn operation, push the LOCK 1 and UNLOCK 2 buttons on the Intelligent Key simultaneously
2 buttons on the Intelligent Key simultaneously for more than 2 seconds.

- When the hazard indicator mode is set, the hazard indicator flashes 3 times.

- When the hazard indicator and horn mode is set, the hazard indicator flashes once and the horn chirps once.

Hood

    Using panic alarm
    If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 1. Push the PANIC button 3 on the Intelligent Key for more than 1 second. 2. The th ...

    Hood
    - Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident. - If you see steam or smoke coming from ...

    See also:

    INFO—displaying additional information
    In certain cases, more information may be available (about a radio station, song, artist, etc.) than is currently displayed on the screen. Press the INFO button to display all of the availabl ...

    Driving with the Blind Spot Mirror
    Actual Mirror View 1. When the approaching vehicle is a long distance away, the image in the main mirror is small and near the inboard edge of the mirror. 2. As the vehicle gets closer, the imag ...

    Canceling and resuming the constant speed control
    1 Pulling the lever toward you cancels the constant speed control. The speed setting is also canceled when the brakes are applied. 2 Pushing the lever up resumes the constant speed control. ...