Jeep Liberty: Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) — 
If Equipped - How To Use Remote Start - Remote Starting System — If Equipped - Things To Know Before Starting Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) — If Equipped

The following messages will display in the EVIC if the vehicle fails to remote start or exits remote start prematurely:
• Remote Start Aborted — Door Ajar
• Remote Start Aborted — Hood Ajar
• Remote Start Aborted — L/Gate Ajar
• Remote Start Aborted — System Fault
• Remote Start Aborted — Fuel Low

The EVIC message stays active until the ignition is turned to the ON/RUN position.

    How To Use Remote Start
    All of the following conditions must be met before the engine will remote start: • Shift lever in PARK. • Doors closed. • Hood closed. • Liftgate closed. • Hazard switch off. â ...

    To Enter Remote Start Mode
    Press and release the REMOTE START button on the RKE transmitter twice within five seconds. The parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will ...

    See also:

    Off-Road Recovery
    The vehicle's right wheels can drop off the edge of a road onto the shoulder while driving. Follow these tips: 1. Ease off the accelerator and then, if there is nothing in the way, steer the ...

    Checking drive belts
    Drive belts should be checked periodically for proper tension and adjusted if necessary. At the same time, belts should be examined for cracks, wear, fraying or other evidence of deterioration ...

    Cupholders
    There are two cupholders for the front seat passengers, located in the center console. Front Cupholders The rear passengers have cupholders at the rear of the center console. Rear Cuphold ...