Jeep Liberty: Parksense Display
When the vehicle is in REVERSE, the warning display will turn ON indicating the system status.
Park Assist ON
Park Assist Off
The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone.
As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
Slow Tone
Fast Tone
Continuous Tone
The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone.
The following chart shows the warning alert operation when the system is detecting an obstacle:
NOTE: ParkSense will MUTE the radio, if on, when the system is sounding an audio tone.
Parksense Warning Display
The ParkSense Warning screen will only be displayed if Sound and Display is selected from the Customer- Programmable Features section of the Electronic Vehicle Information Center (EVIC). Refer t ...Enabling And Disabling Parksense
ParkSense can be enabled and disabled with a switch located in the switch bank of the instrument panel or through the Customer-Programmable Features section of the EVIC. The available choices ar ...See also:
Disposal Of Used Engine Coolant
Used ethylene glycol based engine coolant (antifreeze) is
a regulated substance requiring proper disposal. Check
with your local authorities to determine the disposal
rules for your community. T ...
Fuse layout and amperage ratings
■ Engine compartment
Type A (driver’s side)
*1: Vehicles with towing package
*2: Vehicles with 2.5 L 4-cylinder (2AR-FE) engine
*3: Vehicles with 3.5 L V6 (2GR-FE) engine
Type B ( ...
Installing the cover
1. Press the end piece on one side of the
cargo area cover into the retaining bracket
in the side panel of the cargo area 1.
2. Do the same on the opposite side 2.
3. Press both sides of the cov ...