Toyota RAV4: Follow the correction procedures - If a warning light turns on or a warning buzzer sounds... - Essential information - When trouble arises - Toyota RAV4 Owner's ManualToyota RAV4: Follow the correction procedures

After taking the specified steps to correct the suspected problem, check that the warning light turns off.

*1:Driver's and front passenger’s seat belt warning buzzers

*1:Driver's and front passenger’s seat belt warning buzzers
The driver’s and front passenger’s seat belt warning buzzers sound to alert the driver and front passenger that his or her seat belt is not fastened. The buzzer sounds intermittently for 10 seconds after the vehicle has reached a speed of 12 mph (20 km/h). Then, if the seat belt is still unfastened, the buzzer will sound at a different tone for 20 more seconds. *2:Refer to the separate “Scheduled Maintenance Guide” or “Owner's Manual
Supplement” for the maintenance interval applicable to your vehicle.

    Have the vehicle inspected immediately
    Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. ...

    Follow the correction procedures. (vehicles with smart key system)
    After taking the specified steps to correct the suspected problem, check that the warning light turns off. *: If the engine does not start when the electronic key is inside the vehicle, the e ...

    See also:

    When Can a Larger Child Sit in Front
    The National Highway Traffic Safety Administration and Transport Canada recommend that all children aged 12 and under be properly restrained in a back seat. If the passenger’s front airbag ...

    Road Tire Installation
    1. Mount the road tire on the axle. 2. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts. WARNING! To avoid the risk of forcing ...

    High/Low Beam Switch
    Push the multifunction lever away from you to switch the headlights to high beam. Pull the multifunction lever toward you, to switch the headlights back to low beam. ...