Jeep Liberty: Cooling System – Drain, Flush, And Refill
If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant (antifreeze).
Refer to the “Maintenance Schedule” for the proper maintenance intervals.
Engine Coolant Checks
Check the engine coolant (antifreeze) protection every
12 months (before the onset of freezing weather, where
applicable). If the engine coolant (antifreeze) is dirty or
rusty in appearance, the ...
Selection Of Engine Coolant
Use only the manufacturer’s recommended engine coolant
(antifreeze). Refer to “Fluids, Lubricants, and Genuine
Parts” in “Maintaining Your Vehicle” for further
information.
CAUTION!
...
See also:
Steering wheel tilt lever
To Adjust the Steering Wheel:
1. Push the lever downward to unlock.
2. Raise or lower the steering wheel to the
desired position.
3. After adjustment, securely tighten the lever
by pulling ...
Vehicle Storage
Tires age when stored normally mounted on a parked vehicle. Park a vehicle that
will be stored for at least a month in a cool, dry, clean area away from direct
sunlight to slow aging. This area sh ...
Selecting a station (in wavebands AM/FM1/FM2)
Automatic tuning
1. Press RADIO. Continue pressing this button
to toggle to the desired waveband
(AM, FM1, etc.).
2. Release the button and wait several seconds
or press OK/MENU.
3. Press the ...
