Volvo XC60: Selecting a station (in wavebands AM/FM1/FM2)
Automatic tuning
1. Press RADIO. Continue pressing this button to toggle to the desired waveband (AM, FM1, etc.).
2. Release the button and wait several seconds or press OK/MENU.
3. Press the left or right arrow keys on the center console control panel to search for the next available station.
List of stations (in wavebands FM1/FM2 only)
The radio automatically compiles a list of the strongest FM stations whose signals are currently being received. This enables you to find stations when driving in areas where radio stations and their frequencies are unfamiliar.
To access this list:
1. Select the desired waveband (FM1 or FM2).
2. Turn TUNE one step in either direction.
This displays the list of stations in the area.
The currently tuned station will be indicated in the list by magnified text.
3. Turn TUNE again in either direction to select a station on the list.
NOTE
• This list will only display the frequencies
of the stations currently being received,
not a complete list of all radio frequencies
on the currently selected waveband.
• If the signal from the currently tuned station is weak, this may prevent the radio from updating the list of stations.
If this occurs, press while the list of stations is displayed to switch to manual tuning mode and select a station.
If the list of stations is no longer displayed, turn TUNE in either direction to display the list again and press .
The list will disappear from the display after several seconds.
If the station list is no longer displayed, turn TUNE in either direction and press on the number key pad on the center console to switch to manual tuning (or to switch back from manual tuning to the "list of stations" function).
Manual tuning
By default, the list of stations of the strongest stations in the area will be displayed when you turn TUNE (see the preceding section, "List of stations"). While the list of stations is displayed, press on the number key pad on the center console to switch to manual tuning, which enables you to select a frequency from the complete list of all radio frequencies available on the currently selected waveband. In other words, in manual tuning mode, turning TUNE one step will change from e.g., 93.3 to 93.5, etc.).
To manually tune a station:
1. Press RADIO. Continue pressing this button to toggle to the desired waveband (AM, FM1, etc.) and wait for several seconds or press OK/MENU to confirm.
2. Turn TUNE to select a frequency
NOTE
The radio is initially set to automatically
search for stations in the area in which you
are driving (see the preceding section, "List
of stations").
However, if you have switched to manual tuning (by pressing on the number key pad on the center console while the list of stations is displayed), the radio will remain in manual tuning mode the next time it is switched on. To switch back to "list of stations" mode, turn TUNE one step (to display the full list of stations) and press .
Please note that if you press when the list of stations is not displayed, this will activate the INFO function (see page 211 for more information about this function).
General functions
1 RADIO button for selecting the AM, FM1, FM2, Sirius1* or Sirius2* wavebands. 2 Number key buttons (0-9). 3 Navigate among the menu alternatives in the display by turning TUNE. 4 Confirm you ...Storing preset stations
Ten preset stations can be stored for each waveband (AM, FM1, etc.). Stored preset stations are selected using the number key buttons on the center console. Manually storing preset stations 1. ...See also:
Adjusting the cross rail positions
Turn the knobs counterclockwise
to release the cross rails.
Slide the cross rails to the appropriate
position for loading luggage
and turn the knobs
clockwise to tighten the cross
rails secu ...
Low battery voltage
If the battery voltage is too low, the parking
brake cannot be applied or released. Connect
an auxiliary battery if the battery voltage is too
low, see page 114. ...
With USB/iPod® mode selected
Press the “” button to skip
forward in the
track/file order. Press the “”
button to
skip backward in the track/file order. The
track/file number will be shown on the
audio display. ...