GMC Terrain: Video Screens - Rear Seat Entertainment (RSE) System - Rear Seat Infotainment - Infotainment System - GMC Terrain Owner's ManualGMC Terrain: Video Screens

The video screens are located in the back of the driver and front passenger seats.

To use the video screen:

To use the video screen:

1. Push the release button located on the seatback console.

2. Move the screen to the desired viewing position.

Push the video screen down into its locked position when it is not in use. The screen turns off automatically.

Only the left RSE seatback console contains the infrared transmitters for the wireless headphones. They may be visible as eight illuminated LEDs. These LEDs are not on the right video screen. Both seatback consoles contain an infrared receiver for the remote control. They are located at the top of each console.

Notice: Avoid directly touching the video screen, as damage may occur. See “Cleaning the Video Screens” later in this section for more information.

    Audio Output
    Audio from the DVD player or auxiliary inputs can be heard through the following: ○ Wireless Headphones ○ Vehicle Speakers The RSE system transmits the audio signal to the wireless head ...

    Video Screen Input Jack
    Each video screen is equipped with a video input jack to allow video cables to be connected from an auxiliary device such as a camcorder or a video game system. This signal will override any video ...

    See also:

    Securing the vehicle to prevent it from rolling away
    WARNING Only jack up the vehicle on level ground or on slight inclines/declines. The vehicle could otherwise fall off the jack and injure you or others. If your vehicle is equipped with a whe ...

    Clear MyKey
    To reset all MyKeys as admin keys do the following: 1. Turn the vehicle on using the admin key. 2. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed. 3. Press and release the RESET button ...

    Sulphur content
    If your vehicle is fitted with a Diesel Particulate Filter (DPF) the maximum Sulphur content must not exceed 0.005%. Using an incorrect fuel will cause serious damage to the DPF. The Sulphur c ...