Jeep Liberty: Sky Slider™ Top Care - Maintenance Procedures - Maintaining Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Sky Slider™ Top Care

Immediate removal of any contaminant is recommended.

Regular washing of the top will enhance its life and appearance, and make successive cleaning easier. Do not subject the top to excessive heat. Frequently vacuum the top and tracks. Periodically wipe dust and dirt from the top and inside of the tracks by hand with an alcohol dampened cloth.

Front/Rear Axle Fluid
For normal service, periodic fluid level checks are not required. When the vehicle is serviced for other reasons the exterior surfaces of the axle assembly should be inspected. If gear oil leaka ...

Washing
Hand washing or an automatic car wash with a soft cloth system is preferred. CAUTION! Avoid pointing a high-pressure hand held spray wand directly at the sides of the top, as this can damage ...

See also:

Brake lights and taillights
The brake lights and taillights are replaced from inside the cargo area. NOTE Before starting to replace a bulb, see page 322. 1. Open the panel. 2. Remove the bulb holder by turning it coun ...

Operation
Steering wheel-mounted controls and display 1 Standby mode 2 Resume set speed 3 Deactivating 4 Activate/set speed 5 Set speed indicator (parentheses indicate standby mode) ...

Type B audio set (if equipped)
Type B audio set (if equipped) The audio set will operate only when the ignition switch is in the “Acc” or “ON” position. - Power and audio controls: refer to page - Radio operation: ...