Jeep Liberty: Using Operator Mode
Press the switch rearward and hold it, the Sky Sliderâ„¢ will open from the front and move toward the rear of the vehicle.
Press the switch forward and hold it, the Sky Sliderâ„¢ will open from the rear and move toward the front of the vehicle.
NOTE: During operation, any movement of the Sky Sliderâ„¢ switch will stop the Sky Sliderâ„¢ roof.
Using Automatic Mode
Press the switch rearward and release it within one-half
second and the Sky Sliderâ„¢ will open from the front and
move automatically toward the rear of the vehicle.
Press the switch forward and ...
See also:
Cleaning the Mirror
Do not spray glass cleaner directly on the mirror. Use a soft towel dampened
with water. ...
Driving tips
Fuel requirements Emission control system Before driving Suggestions for economical
operation Special driving conditions Using four-wheel drive Weight of the vehicle
Trailer towing Overloading Veh ...
Replacing high-mount brake lamp bulbs
1. Remove the two screws and move
the lamp assembly away from the
liftgate.
2. Remove the bulb holder from the
lamp assembly by pressing the
snaps.
3. Pull the bulb straight out of the
sock ...