Hyundai Tucson: Bi-level heating
Your Hyundai is equipped with bi-level heating
controls. To use this feature:
o Set the air intake control to the fresh air
(
) position.
o Set the air flow control at the bi-level (
)
position.
o Adjust the fan speed control to the desired
speed.
o Set the temperature control between "Cool"
and "Warm".
Heating controls
For normal heating operation, set the air intake
control to the fresh air () position and
the
air flow control to the floor ()
position.
For faster heating, the air intake control should
...
Ventilation
To operate the ventilation system:
o Set the air intake control to "Fresh" mode
().
o To direct all intake air to the dashboard
vents, set the airflow control to "Face" ( ...
See also:
Door key unlocking/locking
Unlocking the doors
Turn the key in the door cylinder to unlock the driver’s door only. All
other doors will remain locked.
Locking the doors
Turn the key in the door cylinder to lock the driver ...
Adjusting the position of the air outlets
Front outlets (center)
Direct air flow to the left or right,
up or down.
Front outlets (right and left sides)
Direct air flow to the left or right,
up or down. ...
To install the cover housing
1. Remove the cover of the retainers by
prying on the edge with a flat-head
screwdriver.
2. Insert the projections located on the
both ends of the sleeve into the recesses
of the reta ...
