Subaru Forester: To install the cover housing
1. Remove the cover of the retainers by prying on the edge with a flat-head screwdriver.
2. Insert the projections located on the both ends of the sleeve into the recesses of the retainers.
To remove the cover
1. Rewind the cover.
2. Push the switch that is next to the right
end of the cover housing.
3. Take it off the retainer. ...
Cargo tie-down hooks
Cargo tie-down hooks
The cargo area is equipped with four tiedown
hooks so that cargo can be secured
with a cargo net or ropes.
When using the tie-down hooks, turn them
down out of the sto ...
See also:
Vehicle load capacity
Do not exceed the load limit of your vehicle
shown as “The combined weight of occupants
and cargo” on the Tire and Loading
Information label. Do not exceed the
number of occupants shown ...
Composition du système de sacs de sécurité gonflables
1 Sacs de sécurité gonflables
rideau
2 Sacs de sécurité gonflables
latéraux
3 Sac de sécurité gonflable
passager avant
4 Capteurs de sacs de
s ...
Vehicle identification number (VIN)
The vehicle identification number (VIN) can be found in the following locations:
on the vehicle identification plate ()
on the lower edge of the windshield ()
In addition to being stamped on ...
