Ford Escape: Rear seats

Ford Escape / Ford Escape 2nd Gen Owner's Manual / Seating and Safety Restraints / Rear seats

Second row adjustable head restraints

Your vehicle is equipped with second row outboard and center head restraints that are vertically adjustable.

crash, the driver and passenger occupants should not sit in WARNING: To minimize the risk of neck injury in the event of a crash, the driver and passenger occupants should not sit in and/or operate the vehicle, until the head restraint is placed in its proper position. The driver should never adjust the head restraint while the vehicle is in motion.

The adjustable head restraints consist of :
• a trimmed energy absorbing foam and structure (1),
• two steel stems (2),
• a guide sleeve adjust/remove button (3),

To adjust the head restraint, do the following:

To adjust the head restraint, do the following:
1. Adjust the seatback to an upright driving/riding position.
2. Raise the head restraint by pulling up on the head restraint.

3. Lower the head restraint by

3. Lower the head restraint by pressing and holding the guide sleeve adjust/remove button and pushing down on the head restraint.

Properly adjust the head restraint so that the top of the head restraint is

Properly adjust the head restraint so that the top of the head restraint is even with the top of your head and positioned as close as possible to the back of your head. For occupants of extremely tall stature, adjust the head restraint to its full up position.

WARNING: The adjustable head restraint is a safety device.

Whenever possible it should be installed and properly adjusted when the seat is occupied.

To remove the adjustable head restraint, do the following:

1. Pull up the head restraint until it reaches the highest adjustment position.

2. Press and hold the adjust/remove

2. Press and hold the adjust/remove button, then pull up on the head restraint.

To reinstall the adjustable head restraint, do the following:

To reinstall the adjustable head restraint, do the following:

1. Insert the two stems into the guide sleeve collars.
2. Push the head restraint down until it locks.

Properly adjust the head restraint so that the top of the head restraint is

Properly adjust the head restraint so that the top of the head restraint is even with the top of your head and positioned as close as possible to the back of your head. For occupants of extremely tall stature, adjust the head restraint to its full up position.

crash, head restraints must be installed properly. WARNING: To minimize the risk of neck injury in the event of a crash, head restraints must be installed properly.

Folding down second row seats

1. Remove the second row head restraint. See Second row adjustable head restraints in this chapter.
Note: Place the head restraint underneath the back of the front seat for storage.

2. Pull the seat release strap.

Note: Make sure the floor is clear of all objects before folding the seat.

Note: Make sure the floor is clear of all objects before folding the seat.

3. Flip seat forward.

Attach the safety belt web snap

Attach the safety belt web snap button to the quarter trim panel snap button. This will ensure that safety belt does not get caught by staying out of the seat back folding path.

4. To release seatback, pull the

4. To release seatback, pull the seatback release lever (on top of seat) toward the front seat. This is common for both 60% and 40% seatbacks.

Note: When the seatback release lever is pulled, slowly lower seatback to the flat position.

5. Rotate seatback down into load

5. Rotate seatback down into load floor position.

Returning the second row seats to upright position

Returning the second row seats to upright position

1. Pull seatback up and into upright position making sure seatback locks into place and the red seat unlatched indicator on release paddle is not visible.

2. Rotate seat cushion down into the

2. Rotate seat cushion down into the seating position making sure that the seat cushion is locked into place and that the safety belt buckles are exposed.

WARNING: Make sure

safety belt buckle heads are WARNING: Make sure safety belt buckle heads are through elastic holders on seat backs. Safety belt buckles may break if they are trapped underneath the seatback as the seatback is rotated down.

position, make sure that cargo or any objects are not trapped WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. After returning the seatback to its original position, reinstall the head restraints, and pull on the seatback to ensure that it has fully latched. An unlatched seat may become dangerous in the event of a sudden stop or collision.

3. Unsnap the safety belt webbing from the quarter trim panel.
4. Remove the second row head restraint from underneath the front seat and reinstall. See Second row adjustable head restraints in this chapter.

To remove the second row cushion

1. Lift the yellow tab to release the hinges.
2. Pull the cushion to the outboard side of the vehicle.

To install the second row cushion

To install the second row cushion

1. Push the cushion to the inboard side of the vehicle.
2. Make sure that the hinges are locked into place.

Personal Safety System™

Front Seats
Personal Safety System™

See also:


Accessory power outlets
Power outlet below the climate controls Power outlet in the center console Power outlet in the cargo area Accessory power outlets are provided below the climate controls, in the center console and in the cargo area. Electrical po ...

Foreword
Congratulations on choosing a SUBARU vehicle. This Owner’s Manual has all the information necessary to keep your SUBARU in excellent condition and to properly maintain the emission control system for minimizing emission pollutants. We urge y ...