Volvo XC60: Switching off the engine - Starting the engine - Your driving environment - Volvo XC60 Owner's ManualVolvo XC60: Switching off the engine

With the engine running, press the START/ STOP ENGINE button.

If the gear selector is not in the P position or if the vehicle is moving, press the button twice or press and hold it in until the engine switches off.

    Start
    Ignition switch with remote key inserted ( see page 82 for more information on ignition modes) WARNING Before starting the engine: • Fasten the seat belt. • Check that the seat, steering w ...

    Jump starting
    Connecting the jumper cables Follow these instructions to jump start your vehicle's dead battery or to jump start another vehicle's dead battery using your vehicle. If the 12-volt auxiliary b ...

    See also:

    StabiliTrak® System
    The StabiliTrak system assists with directional control of the vehicle in difficult driving conditions. The system is on when the vehicle is started. ○ To turn off both Traction Control and S ...

    Replacing Tires andWheels
    Replace your tires with radial tires of the same size, load range, speed rating, and maximum cold tire pressure rating (as shown on the tire’s sidewall). Mixing radial and bias-ply tires on ...

    Using the touch screen
    Always run the engine during prolonged use of the touch screen. Failure to do so may discharge the vehicle battery, preventing the engine from starting. Avoid spilling or splashing liquids onto ...