GMC Terrain: Remote Keyless Entry (RKE) System - Initial Drive Information - In Brief - GMC Terrain Owner's ManualGMC Terrain: Remote Keyless Entry (RKE) System

The Remote Keyless Entry (RKE) transmitter will work up to 60m(195 ft) away from the vehicle.

Press this button to extend the key. The key can be used for the ignition and

Press this button to extend the key. The key can be used for the ignition and all locks.

or all doors. : Press to unlock the driver door or all doors.

Lock and unlock feedback can be personalized. : Press to lock all doors.

Lock and unlock feedback can be personalized.

press and hold until the liftgate begins to move to open the liftgate.: For vehicles with the power liftgate, press and hold until the liftgate begins to move to open the liftgate.

For vehicles without the power liftgate, first press to unlock the liftgate., then press and hold : Press and release to locate the to unlock the liftgate.

vehicle. Press and hold for at least two seconds to sound the panic alarm. Press : Press and release to locate the vehicle. Press and hold for at least two seconds to sound the panic alarm. Press See Keys on page 2‑2 and Remote Keyless Entry (RKE) System Operation on page again to cancel the panic alarm.

See Keys on page 2‑2 and Remote Keyless Entry (RKE) System Operation on page 2‑3.

    Initial Drive Information
    This section provides a brief overview about some of the important features that may or may not be on your specific vehicle. For more detailed information, refer to each of the features which can ...

    Remote Vehicle Start
    With this feature the engine can be started from outside of the vehicle. ...

    See also:

    Calibrate Compass
    Refer to “Compass Display” for more information. ...

    Customization that can be configured at Toyota dealer
    It is possible to deactivate the smart key system etc. ...

    Ignition mode I
    NOTE To access ignition modes I or II without starting the engine, the brake pedal must not be depressed. - With the remote key fully pressed into the ignition slot, press START/STOP ENGINE ...