GMC Terrain: Park Brake and P (Park) Mechanism Check
WARNING
When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehicle begin to move.
Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake.
○ To check the parking brake's holding ability: With the engine running and the
transmission in N (Neutral), slowly remove foot pressure from the regular brake
pedal. Do this until the vehicle is held by the parking brake only.
○ To check the P (Park) mechanism's holding ability: With the engine running, shift
to P (Park). Then release the parking brake followed by the regular brake.
Contact your dealer if service is required.
Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF
in each shift lever position.
○ The ignition should turn to LOCK/OFF only when the shift lever is in P (Park ...
Wiper Blade Replacement
Windshield wiper blades should be inspected for wear and cracking. See Maintenance
Schedule on page 11‑3 for more information.
Replacement blades come in different types and are removed in di ...
See also:
Rear center seatbelt
Rear center seatbelt
1) Center seatbelt tongue plate
2) Connector (tongue)
3) Connector (buckle)
4) Center seatbelt buckle
Fastening the seatbelt with the webbing
twisted can increas ...
Adding Washer Fluid
The windshield and rear window washers share the same
fluid reservoir. The fluid reservoir is located in the front
of the engine compartment. Be sure to check the fluid
level in the reservoir at ...
Locking doors
1. Remove the key from the ignition switch.
2. Close all the doors.
3. Push the LOCK button 1 on the
keyfob.
4. All the doors will lock.
All of the doors will lock when the LOCK
button is pu ...
