Subaru Forester: When checking or servicing in the engine compartment (non-turbo models) - Maintenance precautions - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: When checking or servicing in the engine compartment (non-turbo models)

- Do not contact the belt cover

- Do not contact the belt cover while checking the components in the engine compartment.

Doing so may cause your hand to slip off the belt cover and result in an unexpected injury.

- Do not touch the oil filter until the engine has cooled down completely.

Doing so may result in a burn or other injury. Note that the oil filter becomes very hot when the engine is running and remains hot for some time after the engine has stopped.

    Before checking or servicing in the engine compartment
    - Always stop the engine and set the parking brake firmly to prevent the vehicle from moving. - Always let the engine cool down. Engine parts become very hot when the engine is running and ...

    When checking or servicing in the engine compartment while the engine is running
    A running engine can be dangerous. Keep your fingers, hands, clothing, hair and tools away from the cooling fan, belts and any other moving engine parts. Removing rings, watches and ties ...

    See also:

    Seat belt (red)
    Seat belt (red) Illuminates when the ignition is on and an occupied front seat belt is unbuckled. The lamp will extinguish after sixty seconds or when the relevant seat belt(s) is buckled. In s ...

    Introduction
    Volvo advises you to follow the maintenance program outlined in the Warranty and Service Records Information booklet. This maintenance program contains inspections and services necessary for t ...

    License Plate Lamp
    To replace one of these bulbs: 1. Open the liftgate partway. See Liftgate on page 2‑9. Passenger Side Shown, Driver Side Similar 2. Push the left end of the lamp assembly toward the right. ...