Jeep Liberty: Using Operator Mode
Press the switch rearward and hold it, the Sky Sliderâ„¢ will open from the front and move toward the rear of the vehicle.
Press the switch forward and hold it, the Sky Sliderâ„¢ will open from the rear and move toward the front of the vehicle.
NOTE: During operation, any movement of the Sky Sliderâ„¢ switch will stop the Sky Sliderâ„¢ roof.
Using Automatic Mode
Press the switch rearward and release it within one-half second and the Sky Sliderâ„¢ will open from the front and move automatically toward the rear of the vehicle. Press the switch forward and ...See also:
Driving
This section gives you tips on
starting the engine under various
conditions, and how to operate the
automatic transmission. It also
includes important information on
parking your vehicle, th ...
Compass zone adjustment
1. Determine which magnetic zone
you are in for your geographic
location by referring to the zone
map.
2. Turn ignition to the on position.
3. Start the engine.
4. Press the SETUP control to s ...
Slippery road surfaces
WARNING
The outside temperature indicator is not designed to serve as an ice-warning
device and is therefore unsuitable for that purpose.
Indicated temperatures just above the freezing point ...