Jeep Liberty: To Set A Desired Speed
Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected speed.
NOTE: The vehicle should be traveling at a steady speed and on level ground before pressing the SET button.
To Activate
Push the ON/OFF button. The Cruise Indicator Light in
the instrument cluster will illuminate. To turn the system
off, push the ON/OFF button a second time. The Cruise
Indicator Light will turn o ...
To Deactivate
A soft tap on the brake pedal, pushing the CANCEL
button, or normal brake pressure while slowing the
vehicle will deactivate Electronic Speed Control without
erasing the set speed memory. Pressi ...
See also:
Lubrication oil circulation in the refrigerant circuit
Operate the air conditioner compressor at
a low engine speed (at idle or low driving
speeds) a few minutes each month during
the off-season to circulate its oil. ...
Adjusting the position of the air outlets
Front outlets (center)
Direct air flow to the left or right,
up or down.
Front outlets (right and left sides)
Direct air flow to the left or right,
up or down. ...
Preparing the vehicle
Stop the vehicle as far away as possible from traffic on solid, non-slippery
and level ground.
Switch on the hazard warning lamps.
Firmly depress the parking brake.
Bring the front wheels ...
