Jeep Liberty: To Deactivate
A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory. Pressing the ON/OFF button or turning the ignition switch OFF erases the set speed memory.
To Set A Desired Speed
Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected s ...To Resume Speed
To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed above 20 mph (32 km/h). ...See also:
Spark Plugs
Spark Plugs
Spark Plugs
You should inspect spark plugs periodically for carbon deposits. When carbon
accumulates on a spark plug, a strong spark may not be produced. Remove carbon deposits
wit ...
Roof rack (if so equipped)
Roof rack (if so equipped)
Secure the crossbars to the roof rail before
loading. The crossbars are available from a
NISSAN dealer.
Always distribute the luggage evenly on the roof
rack. Do ...
NISSAN Vehicle Immobilizer System keys
NISSAN Vehicle Immobilizer System keys
1. Master key (2)
2. Key number plate (1)
Your vehicle can only be driven with the master
keys which are registered to the NISSAN
Vehicle Immobilizer S ...