Subaru Forester: To decrease the speed (by button) - To change the cruising speed - Cruise control - Starting and operating - Subaru Forester Owner's ManualSubaru Forester: To decrease the speed (by button)

To decrease the speed (by button)
To decrease the speed (by button)

Push the “SET/COAST” button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be memorized and treated as the new set speed.

When the difference between the actual vehicle speed and the set speed is less than 4 mph (6.8 km/h), the set speed can be lowered 1 mph (1.6 km/h) each time by pressing the “SET/COAST” button quickly.

    To increase the speed (by accelerator pedal)
    1. Depress the accelerator pedal to accelerate the vehicle to the desired speed. 2. Push the “SET/COAST” button once. Now the desired speed is set and the vehicle will keep running at that ...

    To decrease the speed (by brake pedal)
    1. Depress the brake pedal to release cruise control temporarily. 2. When the speed decreases to the desired speed, press the “SET/COAST” button once. Now the desired speed is set and the ...

    See also:

    MT models
    1. Apply the parking brake. 2. Turn off unnecessary lights and accessories. 3. Press the clutch pedal to the floor and shift the shift lever into neutral. Hold the clutch pedal to the floor whil ...

    License Plate Lamp
    To replace one of these bulbs: 1. Open the liftgate partway. See Liftgate on page 2‑9. Passenger Side Shown, Driver Side Similar 2. Push the left end of the lamp assembly toward the right. ...

    Seat Belt System Components
    Your seat belt system includes lap/ shoulder belts in all seating positions. The front seat belts are also equipped with automatic seat belt tensioners. This system uses the same sensors as ...