Toyota RAV4: Switching the door unlock function
It is possible to set which doors the entry function unlocks.
1 Turn the “ENGINE START STOP” switch OFF. 2 When the indicator on the key surface is turned off, push and hold for approximately 5 seconds while pushing on the key.
The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.)
Conditions affecting operation
The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system and wireless re ...Battery-saving function
In the following circumstances, the entry function is disabled in order to prevent the vehicle and electronic key batteries from discharging. ●When the entry function has not been used for 2 ...See also:
Potential Vehicle Hazards
Carbon Monoxide poison from
engine exhaust. Be sure there is
adequate ventilation whenever you
operate the engine.
Burns from hot parts. Let the
engine and exhaust system cool
down before t ...
Instrument Panel Fuse Block
The instrument panel fuse block is located on the passenger side panel of the
center console. To access the fuses, open the fuse panel door from the passenger
side by pulling it out.
To reinsta ...
Fluid Capacities
...