Toyota RAV4: Battery-saving function
In the following circumstances, the entry function is disabled in order to
prevent
the vehicle and electronic key batteries from discharging.
●When the entry function has not been used for 2 weeks or more
●When the electronic key has been left within approximately 3 ft. (1 m) of
the vehicle for 10 minutes or more
The system will resume operation when...
●The vehicle is locked using the door handle lock button.
●The vehicle is locked/unlocked using the wireless remote control function.
●The vehicle is locked/unlocked using the mechanical key.
Switching the door unlock function
It is possible to set which doors the entry function unlocks.
1 Turn the “ENGINE START STOP” switch OFF.
2 When the indicator on the key surface is turned off, push and hold
for approxim ...
Electronic key battery depletion
●The standard battery life is 1 to 2 years. (The battery becomes depleted
even if the electronic key is not used.) If the smart key system or the
wireless remote control function does not oper ...
See also:
Replacement of lamp bulbs
Before replacing a bulb, ensure the lamp is off. Do not touch the glass part
of the new bulb with your bare fingers; the skin oil left on the glass will evaporate
when the bulb gets hot and the va ...
Radio operation and cellular phones
Under certain conditions, the cellular phone being on in
your vehicle can cause erratic or noisy performance from
your radio. This condition may be lessened or eliminated
by relocating the cellu ...
Setting passkey
1. Select the “SET PASSKEY” menu.
After the currently set passkey is displayed,
a new passkey can be entered.
2. Input the new passkey by operating
the “TUNE/TRACK/CH” dial or saying the ...
