Volvo XC60: Switching off the engine
With the engine running, press the START/ STOP ENGINE button.
If the gear selector is not in the P position or if the vehicle is moving, press the button twice or press and hold it in until the engine switches off.
Start
Ignition switch with remote key inserted ( see page 82 for more information on ignition modes) WARNING Before starting the engine: • Fasten the seat belt. • Check that the seat, steering w ...Jump starting
Connecting the jumper cables Follow these instructions to jump start your vehicle's dead battery or to jump start another vehicle's dead battery using your vehicle. If the 12-volt auxiliary b ...See also:
Seat belt maintenance
Check periodically that the seat belts are in
good condition. Use water and a mild detergent
for cleaning. Check seat belt mechanism
function as follows: attach the seat belt and pull
rapidly ...
Initialization
When the ignition switch is placed in the ON
position, NISSAN Voice Recognition is initialized,
which takes a few seconds. If the
button is pushed before the initialization completes,
the sys ...
Towing Requirements – Tires
− Do not attempt to tow a trailer while using a compact
spare tire.
− Proper tire inflation pressures are essential to the safe
and satisfactory operation of your vehicle. Refer to
...