Jeep Liberty: To Resume Speed
To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed above 20 mph (32 km/h).
To Deactivate
A soft tap on the brake pedal, pushing the CANCEL
button, or normal brake pressure while slowing the
vehicle will deactivate Electronic Speed Control without
erasing the set speed memory. Pressi ...
To Vary The Speed Setting
When the Electronic Speed Control is set, you can increase
speed by pushing the RES (+) button. If the button
is continually pressed, the set speed will continue to
increase until the button is ...
See also:
Automatic powerfold mirrors
Powerfold mirrors can be configured to
automatically fold when the vehicle is locked
and unfold when unlocked.
This function can be enabled/disabled
by your Dealer/Authorised Repairer.
Note: If ...
Body Component Lubrication
Lubricate all key lock cylinders, hood hinges, liftgate hinges, and the steel
fuel door hinge unless the components are plastic. Applying silicone grease on weatherstrips
with a clean cloth will m ...
High-beam headlamps
To switch on the high-beam headlamps: turn the SmartKey in the ignition
lock to position 2 or start the engine.
Turn the light switch to
or or
.
Press the combination switch beyond th ...
