Mitsubishi Outlander: Parking brake
To park the vehicle, first bring in to a complete stop, fully engage the parking brake.
To apply
1- Pull the lever up without pushing the button at the end of hand grip.
To release
1- Pull the lever up slightly. 2- Push the button at the end of hand grip. 3- Push the lever downward.
CAUTION:
● Before driving, be sure that the parking brake is fully released and brake warning
lamp is off. If you drive without the parking brake fully released, “RELEASE PARKING
BRAKE” will appear on the information screen in the multi-information display. If
a vehicle is driven without releasing the parking brake, the brakes will be overheated,
resulting in ineffective braking and possible brake failure.
Running-in recommendations
During the running-in period for the first 1,000 km (600 miles), it is advisable to drive your new vehicle using the following precautions as a guideline to aid long life as well as future econo ...Parking
To park the vehicle, fully engage the parking brake, and then move the gearshift lever to 1st or “R” (Reverse) position. Parking on a hill To prevent the vehicle from rolling, follow these pro ...See also:
Booster seat installation
Do not use the lap/shoulder belt Automatic
Locking Retractor (ALR) mode
when using a booster seat with the
seat belts.
Refer to all Warnings and Cautions in the “Child
safety”, “Chi ...
Engine Oil Additives
Your vehicle does not require any oil
additives. Additives may adversely
affect the engine or transmission
performance and durability. ...
Battery Replacement
The recommended replacement battery is CR2032.
NOTE:
• Perchlorate Material — special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
• Do not touch the battery terminal ...