Mitsubishi Outlander: Parking
To park the vehicle, fully engage the parking brake, and then move the gearshift lever to 1st or “R” (Reverse) position.
Parking on a hill
To prevent the vehicle from rolling, follow these procedures:
Parking on a downhill
Turn the front wheels toward the kerb and move the vehicle forward until the kerb side wheel gently touches the kerb. Set the parking brake and place the gearshift lever into the “R” (Reverse) position. If necessary, apply chocks to wheels.
Parking on an uphill
Turn the front wheels away from the kerb and move the vehicle back until the kerb side wheel gently touches the kerb. Set the parking brake and place the gearshift lever into the 1st position. If necessary, apply chocks to wheels.
Parking with the engine running
Never leave the engine running while you take a short sleep/rest. Also, never leave the engine running in a closed or poorly ventilated place. Leaving the engine running risks injury or death from accidentally moving the gearshift lever or the accumulation of toxic exhaust fumes on the passenger compartment.
Where you park
WARNING:
● Do not park your vehicle in areas where combustible materials such as dry grass
or leaves can come in contact with a hot exhaust, since a fire could occur.
When leaving the vehicle
Always carry the key and lock all doors and the split tailgate when leaving the vehicle unattended. Always try to park your vehicle in a well lit area.
Parking brake
To park the vehicle, first bring in to a complete stop, fully engage the parking brake. To apply 1- Pull the lever up without pushing the button at the end of hand grip. To release 1- Pull t ...Steering wheel height adjustment
1. Release the tilt lock lever while holding the steering wheel up. 2. Adjust the steering wheel to the desired height. 3. Securely lock the steering wheel by pulling the tilt lock lever fully upw ...See also:
Engine Cooling When Trailer Towing
The cooling system may temporarily overheat during severe operating conditions.
See Engine Overheating on page 10‑20. ...
System self-test
The indicator lamp illuminates when
you:
turn the SmartKey to position 1 or 2 in the ignition lock
on vehicles with KEYLESS-GO, press the Start/Stop button once or twice
If an adult occupa ...
Load index
Tire data is vehicle-specific and may deviate from the data in the example.
In addition to the load bearing index, load index 1 may be imprinted after the
letters that identify speed index 6 ( ...