Volvo XC60: Low beams
When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or .
Daytime running lights can be deactivated in the MY CAR menu system under Settings Car settings Light settings Daytime running lights.
However, please be aware that these lights may not be deactivated in Canada.
NOTE
• The use of daytime running lights is
mandatory in Canada.
• Continuous high beams cannot be activated
when the headlight switch is in
position . High beam flash
will
function in this position.
High/low beam headlights
Continuous high beams 1. Set the ignition to mode II. 2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high an ...Active Bending Lights (ABL)
Headlight pattern with the Active Bending Light function deactivated (left) and activated (right) When this function is activated, the headlight beams adjust laterally to help light up a curve ...See also:
Seat belt pre-tensioner system and force limiter system
The driver’s seat and front passenger’s seat each have a seat belt equipped with
a pre-tensioner system.
Pre-tensioner system
The pre-tensioner system will retract their respective seat belts ...
If your vehicle must be towed
If your vehicle has to be towed, it should be done
by your Hyundai dealer or a commercial tow
truck service. This will help assure that your
vehicle is not damaged in towing. Also, professionals ...
External sound sources
USB flash drive
To simplify the use of a USB flash drive, it is
advisable to only store music files on the drive.
It will take considerably longer for the system to index the files on the drive
...