Volvo XC60: License plate lighting - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: License plate lighting

1. Remove the screws with a screwdriver.

1. Remove the screws with a screwdriver.

2. Carefully detach the entire bulb housing and pull it out.

3. Replace the bulb.

4. Reinsert the entire bulb housing and tighten the screws.

    Brake lights and taillights
    The brake lights and taillights are replaced from inside the cargo area. NOTE Before starting to replace a bulb, see page 322. 1. Open the panel. 2. Remove the bulb holder by turning it coun ...

    Cargo area lighting
    NOTE Before starting to replace a bulb, see page 322. 1. Insert a screwdriver and gently turn so that the bulb housing comes loose. 2. Replace the bulb. 3. Check that the bulb illuminates an ...

    See also:

    Combination lap and shoulder belts
    1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure the tongue is securely fastened ...

    Adjusting the head restraints manually
    Adjusting the head restraint height To raise: pull the head restraint up to the desired position. To lower: press release catch : in the direction of the arrow and push the head restraint d ...

    Running out of fuel
    If you have run out of fuel and need to refill the vehicle with a portable fuel container, see Running out of fuel in the Maintenance and Specifications chapter for proper fuel filling method using ...