Volvo XC60: Brake lights and taillights
The brake lights and taillights are replaced from inside the cargo area.
NOTE
Before starting to replace a bulb, see
page 322.
1. Open the panel.
2. Remove the bulb holder by turning it counterclockwise.
3. Remove the burned out bulb by pressing it in and turning it counterclockwise.
4. Insert a new bulb, press it in and turn it clockwise.
5. Reinsert the bulb holder and turn it clockwise.
Location of taillight bulbs
Taillight lens, right side 1 Parking/side marker lights (LED) 2 Side reflector 3 Brake light 4 Backup light 5 Turn signal 6 Brake lights (LED) NOTE If an error message remains in the display ...License plate lighting
1. Remove the screws with a screwdriver. 2. Carefully detach the entire bulb housing and pull it out. 3. Replace the bulb. 4. Reinsert the entire bulb housing and tighten the screws. ...See also:
Glossary of tire terminology
Terms
The tire suppliers may have additional markings,
notes or warnings such as standard load,
radial tubeless, etc.
• Tire information placard: A placard
showing the OE (Original Equipment ...
Cruise control
Use the cruise control to maintain a set speed without depressing
the accelerator pedal.
1 Indicator
2 Cruise control switch ...
Turn&-by&-Turn Navigation
1. Push to connect to a live Advisor.
2. Request directions.
3. Directions are downloaded to the vehicle.
4. Follow the voice-guided commands. ...