Range Rover Evoque: Headlamps
Moving the nearside headlamp unit to access
bulbs;
1. Remove the two plastic fixings.
2. Pull the tube up to release from the air box.
This will allow more room for
manoeuvrability.
3. Remove the four grille fixings.
4. Remove the two retaining bolts.
5. At the rear of the headlamp unit, pull up on
the T grip release mechanism and hold
while sliding the headlamp unit forward
40mm.
Moving the offside headlamp unit to access
bulbs;
1. Remove the four grille fixings.
2. Remove the two retaining bolts.
3. Remove the fixing then move the filler tube
rearwards. This will allow more room for
access to the bulb holders.
4. At the rear of the headlamp unit, pull up on
the T grip release mechanism and hold
while sliding the headlamp unit forward
40mm.
Removing a headlamp bulb;
1. At the back of the headlamp unit, remove
the cover. Turn it counter clockwise to
release.
2. The back of the bulb unit will now be
exposed. Pull down on the electrical
connector to release it from the bulb unit.
3. Turn the retaining collar counter clockwise
to release the bulb. Remove the bulb unit
from the housing.
READ NEXT:
Removing the nearside bulbs;
To gain more room for accessibility, follow
steps 1 and 2 for moving the nearside
headlamp unit.
1. At the back of the headlamp unit, remove
the indicator bulb hous
1. Remove the two fixings.
2. Direction indicator.
3. Reversing lamp
Turn the relevant bulb holder counter
clockwise and pull to remove from the lamp
unit. Grip the holder then press the bulb i
Access to the rear fog lamp
requires
special tools and should be undertaken
only by a qualified technician. If in
doubt, consult your Land Rover
Dealer/Authorised Repairer.
SEE MORE:
There are more features available than can be
displayed at one time. This menu allows the
selected features to be displayed, for example:
- Ambient lighting: While the headlamps are
turned on, select this feature to turn
ambient lighting on or off. Adjust the
lighting level to suit. Adjusting
It remains the driver's
responsibility
to detect obstacles and estimate the
vehicle's distance from them when
reversing.
When Reverse (R) is selected the camera
provides a wide-angle rear view colour image
on the touch screen.
The camera display has priority over the
parking aid display.
© 2011-2024 Copyright www.rrevoque.org