Range Rover Evoque: Rear lamp bulbs

1. Remove the two fixings.

1. Remove the two fixings.

2. Direction indicator.

3. Reversing lamp

Turn the relevant bulb holder counter clockwise and pull to remove from the lamp unit. Grip the holder then press the bulb into the holder and turn counter clockwise to release the bulb. Pull the bulb up to remove.

READ NEXT:

 Rear fog lamp

Access to the rear fog lamp requires special tools and should be undertaken only by a qualified technician. If in doubt, consult your Land Rover Dealer/Authorised Repairer.

 Cleaning the exterior

Remove any heavy deposits of mud and dirt with a hose before washing the vehicle. Never aim a hose water jet directly at the engine air intake, heater air intakes, body seals or at any compone

 Using white spirit

Stubborn stains such as tar spots and grease may require the use of white spirt. After use, ensure the area is washed immediately with warm soapy water to remove all traces of the spirit.

SEE MORE:

 Voice tutorial

To listen to a tutorial detailing the operation of the Voice system: - Briefly press the Voice button to start a voice session. - Wait for the tone to sound, then say Voice tutorial. Alternatively, the tutorial can be selected using the touch screen, as follows. - Select Setup from the touch

 Rear Inner Quarter Panel

Removal NOTES: The rear inner quarter panel is manufactured from mild steel. The rear inner quarter panel is unpicked from the inner quarter panel, it is not serviced separately. There are NVH components on this panel, they are not serviced on the new panel. If damaged, new components will be re

© 2011-2024 Copyright www.rrevoque.org