Nissan Rogue: Front power seat adjustment
Operating tips:
- The seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait for a while, then reactivate the switch.
- Do not operate the power seat for a long period of time when the engine is off. This will discharge the battery.
Forward and backward:
Moving the switch 1 forward or backward will slide the seat forward or backward to the desired position.
Reclining:
Move the recline switch 2 backward until the desired angle is obtained. To bring the seatback forward again, move the switch 2 forward.
The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. (See “Precautions on seat belt usage” later in this section.) Also, the seatback can be reclined to allow occupants to rest when the vehicle is stopped and the transmission in the P (Park) position with the parking brake fully applied.
Seat lifter (if so equipped):
Pull up or push down the adjusting switch to adjust the height of the seat.
Lumbar support (if so equipped):
The lumbar support feature provides lower back support to the driver.
Push the front or back end of the switch to adjust the seat lumbar area.
Front manual seat adjustment
Forward and backward: Pull the lever 1 up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining: To recli ...Folding front passenger’s seat (if so equipped)
Folding front passenger’s seat (if so equipped) The front passenger’s seatback can be folded down. Some long objects may be loaded in the vehicle when the rear seats are also folded dow ...See also:
Third seat (7 persons)
To fold out the underfloor-stowable third seat
The third seat is stowed under the floor. Use the seat when extra people ride
in your vehicle. When not in use, stow the seat under the floor and use ...
Jacking And Tire Changing
WARNING!
• Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid the danger of being hit when
operating the jack or changi ...
To set cruise control
1. Push the “CRUISE” main switch button.
Type A
Type B
The cruise control indicator light on the
combination meter will illuminate.
2. Depress the accelerator pedal until the
v ...