Subaru Forester: To set cruise control
1. Push the “CRUISE” main switch button.
Type A
Type B
The cruise control indicator light on the combination meter will illuminate.
2. Depress the accelerator pedal until the vehicle reaches the desired speed.
3. Push the “SET/COAST” button and release it. Then release the accelerator pedal.
Type A
Type B
At this time, the cruise control set indicator light on the combination meter will illuminate.
The vehicle will maintain the desired speed.
Vehicle speed can be temporarily increased while driving with the cruise control activated. Simply depress the accelerator pedal to accelerate the vehicle.
When the accelerator pedal is released, the vehicle will return to and maintain the previous cruising speed.
Cruise control
Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal and it is
operative when the vehicle speed is 25
mph (40 km/h) or more. Make ...
To temporarily cancel the cruise control
The cruise control can be temporarily
canceled in the following ways.
- Push the “CANCEL” button.
- Depress the brake pedal.
- Depress the clutch pedal (MT models
only).
- Shift the se ...
See also:
Non-turbo models
...
Using a flat-bed truck
This is the best way to transport your
vehicle. Use the following procedures to
ensure safe transportation.
1. Shift the select lever into the “P”
position for automatic transmission mode ...
Precautions when the vehicle is being towed
• Attach jumper cables (see page 114) to
provide current for releasing the electric
parking brake and to move the gear selector
from the P position to N.
• Be sure that the steering wheel l ...
