Hyundai Tucson: Checking the clutch fluid - Do-it-yourself maintenance - Hyundai Tucson Owner's ManualHyundai Tucson: Checking the clutch fluid

To Check the Clutch Fluid To Check the Clutch Fluid

The clutch fluid level in the master cylinder should be checked when performing other under hood services. The system should be checked for leakage at the same time. Check to make certain that the clutch fluid level is always between the "MAX" and "MIN" level markings on the fluid reservoir. Fill as required. Fluid loss indicates a leak in the clutch system which should be inspected and repaired immediately. Consult your Hyundai dealer.

To Replace the Fluid

Recommended brake fluid conforming to DOT 3 or DOT 4 specification should be used. The reservoir cap must be fully tightened to avoid contamination from foreign matter or moisture.

NOTE: Do not allow any other liquids to contaminate the brake fluid. Seal damage will result.

WARNING: Use caution when handling brake fluid. It can damage your vision if you get it in your eyes. It will also damage your vehicle's paint if spilled on it and not removed immediately.

    Checking the brakes
    CAUTION: Because brakes are essential to the safe operation of the car, it is suggested that they be checked and inspected by your Hyundai dealer. The brakes should be checked and inspected ...

    Air cnditioning care
    Keeping the Condenser Clean The air conditioning condenser (and engine radiator) should be checked periodically for accumulation of dirt, dead insects, leaves, etc. These can interfere with max ...

    See also:

    Compass Operation
    Next to the outside temperature indicator of the information display, a compass indicates which direction your vehicle is pointed. It indicates eight directions. N: North S: South E: East ...

    General maintenance
    During the normal day-to-day operation of the vehicle, general maintenance should be performed regularly as prescribed in this section. If you detect any unusual sounds, vibrations or smell, b ...

    Cruise control indicator light
    This light illuminates when the “CRUISE” main switch is pressed. If you press the main switch button while turning the ignition switch “ON”, the cruise control function is deactivat ...