Mitsubishi Outlander: Cargo area cover
To use
1. Draw out the cover retracted by spring and insert it in the mounting grooves (A).
2. Remove the cover from the mounting grooves, and the cover will be rolled back into the retracted position.
NOTE:
● Do not put luggage on the cargo area cover.
To change
There are 2 installation holes (B) for the cargo area cover.
1. Move one of the sliders (C) toward the inside of the vehicle, and fit the tab (D) into the installation hole that is to be used. Move the opposite slider in the same fashion.
2. After changing the position, gently shake the entire cargo area cover to make sure it is securely retained.
NOTE:
● If the rear seat seatbacks make contact with the cargo area cover, move back the
cargo area cover. The cargo area cover could break if it supports the seatback of
the rear seat.
To remove
1. Wind up the cargo area cover. 2. Move one of the sliders (C) toward the inside of the vehicle and lift it to remove the cargo area cover.
To fit the cargo area cover, follow the removal steps in reverse. Gently shake the entire cargo area cover after fitting it to make sure it is securely retained.
Bottle holder
CAUTION: ● Do not drink beverages while driving. This is distracting and could cause an accident. ● Drinks could be spilled by the vibration and jolts while driving. If the spilt dr ...Luggage hooks
There are 4 hooks located on the floor and side walls of the luggage area. Use the hooks on the floor for securing the luggage. CAUTION: ● Do not pile up the luggage beyond the seatback h ...See also:
Installing front license plate
Use the following steps to mount the license
plate:
Before mounting the license plate, confirm that
the following parts are enclosed in the plastic
bag.
- License plate bracket
- J-nut 6 ...
Off-Road Recovery
The vehicle's right wheels can drop off the edge of a road onto the shoulder
while driving. Follow these tips:
1. Ease off the accelerator and then, if there is nothing in the way, steer the ...
Crash mode
Crash mode ...