GMC Terrain: What to Add - Brake Fluid - Vehicle Checks - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: What to Add

Use only new DOT 3 brake fluid from a sealed container. See Recommended Fluids and Lubricants on page 11‑12.

Always clean the brake fluid reservoir cap and the area around the cap before removing it. This helps keep dirt from entering the reservoir.

WARNING

With the wrong kind of fluid in the brake hydraulic system, the brakes might not work well. This could cause a crash. Always use the proper brake fluid.

Notice

○ Using the wrong fluid can badly damage brake hydraulic system parts. For example, just a few drops of mineral-based oil, such as engine oil, in the brake hydraulic system can damage brake hydraulic system parts so badly that they will have to be replaced. Do not let someone put in the wrong kind of fluid.

○ If brake fluid is spilled on the vehicle's painted surfaces, the paint finish can be damaged. Be careful not to spill brake fluid on the vehicle. If you do, wash it off immediately.

    Brake Fluid
    The brake master cylinder reservoir is filled with DOT 3 brake fluid as indicated on the reservoir cap. See Engine Compartment Overview on page 10‑6 for the location of the reservoir. The ...

    Battery
    Refer to the replacement number on the original battery label when a new battery is needed. WARNING Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals k ...

    See also:

    Why maintain your vehicle?
    This guide describes the scheduled maintenance required for your vehicle. Carefully following this schedule helps protect against major repair expenses resulting from neglect or inadequate maintenan ...

    Changing display modes
    The rear view monitor display mode can be changed while the screen is on. ●To temporarily disable the rear view monitor system Push the “AUTO” button. The indicator will turn amber. Ve ...

    Capacity and distribution
    Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) Steps for Determining Correct Load Limit⎯ (1)Locate the sta ...