Subaru Forester: Selecting turn signal lights operation
When the remote keyless entry system is used, the turn signal lights flash. However, the turn signal lights flashing operational non-operational setting can be changed.
Models with genuine SUBARU navigation system:
The setting can be changed using the navigation monitor. For details, refer to the Owner’s Manual Supplement for the navigation system.
Models without genuine SUBARU navigation system:
The setting can be changed by your SUBARU dealer. Contact your SUBARU dealer for details.
Sounding a panic alarm
Sounding a panic alarm A “PANIC” button is located on the back of the transmitter. To activate the alarm, press the “PANIC” button once. The horn will sound and the turn signal ligh ...Selecting audible signal operation
Using an electronic chirp, the system will give you an audible signal when the doors lock and unlock. If desired, you may turn the audible signal off. Do the following to deactivate the audible ...See also:
Oil viscosity
The engine oil viscosity or thickness changes
with temperature. Because of this, it is important
to select the engine oil viscosity based on the
temperatures at which the vehicle will be
opera ...
Sensor blockage
If one of the sensors is completely obscured
the BSM system is automatically disabled, the
warning indicator dot is displayed in the
exterior mirror and the message BSM sensor
blocked appears in t ...
Important operation tips for the air conditioning
● Park the vehicle in the shade. Parking in the hot sun will make the vehicle inside
extremely hot, and it will require more to cool the interior. If it is necessary
to park in the sun, op ...