Mitsubishi Outlander: Power steering system
When the engine is stopped, the power steering system will not function and it will require greater manual effort to operate the steering wheel. Keep this in mind in particular when towing the vehicle. Never turn off the engine while driving. Periodically check the power steering fluid level.
CAUTION:
● Do not hold the steering wheel in the fully turned position (either left or right),
for longer than 10 seconds. This can cause damage to the power steering system.
Anti-lock brake system (ABS)
Environmental conditions can have an effect on braking. During sudden braking when there is snow, ice, oil, water etc. on the road surface, a skid may occur. In this situation, steering control an ...Active stability control (ASC)*
The active stability control (ASC) takes overall control of the anti-lock brake system, traction control function and stability control function to help maintain the vehicle’s control and tracti ...See also:
Maximum gradient-climbing capability
If the load on the front axle is reduced when pulling away on a steep uphill
slope, the front wheels have a tendency to spin. 4ETS recognizes this and brakes
the wheels accordingly. The rear wh ...
Switching off traction control
If the vehicle is stuck in snow, mud or sand, and seems to lose engine
power, switching off the traction control features of the AdvanceTrac
with RSC system may be beneficial because the wheels are ...
Glass
Use glass cleaner to remove smoke and dust
film from the glass surfaces. It is normal for glass
to become coated with a film after the vehicle is
parked in the hot sun. Glass cleaner and a soft ...